STOP Spending Thousands On Storage Fees For Your Classic Or Exotic - Invest In Our Car Lift
That Will Pay For Itself In Less Than A Year!
Have you had problems finding a place to store your classic or exotic car? Are you already spending thousands per year on storage fees, or even considering an expensive garage renovation?
This 4 post car lift will allow any car enthusiast to double the parking space in their garage easily and cost effectively. Here is how it works:
The first vehicle is driven up on to the car lift ramp, and then easily lifted up by an electric powered hydraulic motor. Once the first
vehicle is at the top, the second vehicle can be safely driven underneath. Our lift is ideal for your summer vehicle, exotic, or classic vehicle.
Benefits of ALI Certified Lift
- Tested and certified to ANSI/ALI specifications
- Store your classic or exotic car safely and easily without having to pay continual storage fees.
- 8,000 lbs capacity - our high capacity lift will be able to easily lift a vehicle as heavy as a Hummer H2.
- Dual lock safety system, combined with a ladder lock design for optimum safety and security.
- Close to home - would you rather have your exotic or classic stored in your garage where you can keep an eye on it or at a distant storage facility location?
- Easy installation - you and your buddies can install the lift in a day.
- 5/1 Limited warranty.
Specifications
| Lifting Capacity |
8,000 Lbs |
| Lifting Height To Top Of Runway |
72" |
| Clearance Under Runways |
68" |
| Height Of Columns |
83" |
| Overall Width (without motor) |
103 1/2" |
| Overall Width (with motor) |
115" |
| Overall Length (with approach ramps) |
207 1/2" |
| Overall Length (without approach ramps) |
175 1/2" |
| Length of approach ramp |
37" |
| Width Of Runways |
21 1/2" |
| Length Of Runways |
165 1/2" |
| Runway Thickness |
4 1/2" |
| Width Between Runways |
37 12" |
| Width Between Runway Rails |
32" |
| Width To Outside Of Runways |
74 3/4" |
| Size Of Column |
6" x 3 1/3" |
| Clearance Between Columns |
94" |
| Length Between Columns |
157 1/2" |
| Base Of Column |
10 1/8" x 12" |
| Maximum Wheel Base |
153 1/2" |
| Drive Thru (outside of tire to outside of tire) |
80 1/2" |
| Cable Diameter |
3/8" |
| Guage Of Steel |
6 Guage (.1875" or 3/16" or 4.75mm) |
| Motor |
110V ONLY |
| Shipping Weight |
1,720 Lbs. |
**NOTE: Specifications are subject to change without notice.
Measuring your vehicles and garage:
The quickest way to determine if the lift will work in your garage setting is to first take three measurements:
#1 - The height of the bottom vehicle
#2 - The height of the top vehicle (the one that you will be raising)
#3 - The height of the garage ceiling
First add the height of both vehicles + 10 inches. If that number is less than the height of the garage ceiling the
lift will work with your setup. Please note that maximum height of the bottom vehicle should be no more than 67".
Please read this before comparison shopping!
Although the function of most car lifts is the same, the quality of materials and workmanship can be very different. Many carlifts are assembled with less than optimal quality controls, and with sub-standard materials. Although this helps the distributor provide you with a better price, it could cost you a lot more.
Imagine the concequences of a lift failure? At CarLift.ca we believe in selling only the most competitively price lifts which can maintain top quality.
Our Guarantee
All of our products come with manufacturer back product warranties. These warranties will vary depending on the product. Please visitor guarantee page for more details. We promise to never sell you a product that we haven't or don't currently use in our own homes.
Delivery
Your lift will ship from either Calgary, AB or Toronto, ON. Our preferred shipping carriers are Kindersley Transport and MO.
Warehouse pickup is free of charge, and we will deliver to any shipping terminal in Canada that our shipping carriers service for $399 across Canada.
Note: NB, NF, NS, and PEI shipments will be subject to a $200 surcharge on the freight cost.
Setup
Our lifts are quite easy to setup. Typically two individuals can setup a lift in 2-4 hours. Each individual part of the lift is manageable with two people;
however the ramp containing the hydraulic ram is quite heavy and we would recommend having a total of 4 people for about 5 minutes for moving that particular part into your garage.
For more details on the setup process please visit the setup page.
Currently our lifts are run using a
3HP, Single Phase, 30 Amp, 110V motor. Please consult a licensed
electrician to ensure that you have the proper wiring. 220V motors will be
available soon for our customers with the appropriate wiring.
Wholesale
Are you interested in reselling our lifts? We offer generous wholesale pricing and reasonable minimum order requirements. If space is an issue, we can also work out special arrangements to store and ship the lifts for you.
Please give us a call!
Would you like to discuss our lifts with us? Please call us toll-free at 1-866-398-5020 to speak to a friendly and knowledgeable staff member.
